SERVOSHOCK
  • Home
  • Store
  • Documentation
    • Servoshock 2 for Dualshock 4
    • Servoshock 1 for Dualshock 3
  • Application Notes
    • Using ServoShock with an R/C ESC
    • Super Soaker ROV
    • Mecanum Wheel Driver
  • Contact

Using ServoShock with an R/C ESC

In this example, we use an electronic speed controller from a R/C car to power the ServoShock module, servos, and the motor; the ServoShock board is powered like a R/C receiver.  This particular ESC (XP SC1300-BL) outputs 6V on the 3-wire connector.  The "Trigger Link" function is enabled, which makes the output signal for the triggers a function of the difference between the two trigger positions.  This allows us to make the right trigger the throttle and the left trigger brake/reverse.
Picture
Click for larger version.
Cross Product Creations